Piping Projects Middle East supplies accurate Washers Weight Chart in kg, mm, PDF The Washer Weight Chart defines the weight of Washers for diverse sizes and wall thicknesses. It is essential to recognize that the outcomes presented are estimations and are subject to variations depending on the particular steel classification and manufacturing techniques employed.
Weight Chart of Washer in mm, inches & kg with its unique length define in the table below.
| APPROX. WEIGHT in KGS for 100 NOS | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SIZE | PLAIN PUNCHED WASHER IS:2016 |
HEAVY WASHER IS:6610 |
MACHINED WASHER IS:2016 |
SQUARE TAPER WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN: 7980 |
Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 |
SPRING WASHER FLAT SECTION BS:1802-1951 | SPRING WASHER SQUARE SECTION BS:1802-1951 | |||
| MACHINED | HIGH STRENGTH FRICTION GRIP |
||||||||||||
| FOR CHANNELS IS:5372-75 |
FOR I-BEAM IS:5374-75 |
TYPE-B (CHANNELS) IS: 6649-85 |
TYPE-C ( I-BEAMS ) IS: 6649-85 |
||||||||||
| M-3 | - | - | - | - | - | - | - | 0.01 | 0.01 | - | - | - | - |
| M-4 | - | - | - | - | - | - | - | 0.02 | 0.02 | - | - | - | - |
| M-5 | 0.04 | - | 0.04 | - | - | - | - | 0.03 | 0.03 | - | - | - | - |
| M-6 | 0.11 | - | 0.11 | - | - | - | - | 0.08 | 0.04 | 1/4″ | 0.21 | - | - |
| M-8 | 0.20 | - | 0.21 | 1.10 | 1.20 | - | - | 0.16 | 0.11 | 5/16″ | 0.35 | - | - |
| M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | - | - | 0.25 | 0.20 | 3/8″ | 0.48 | - | - |
| M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2″ | 1.07 | - | - |
| M-14 | 0.82 | - | - | - | - | - | - | 0.60 | 0.38 | - | - | - | - |
| M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8″ | 1.85 | - | - |
| M-18 | 1.27 | - | - | - | - | - | - | 0.97 | 0.66 | - | - | - | - |
| M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4″ | 2.91 | - | - |
| M-22 | 1.75 | - | - | - | - | 7.50 | 7.00 | 1.65 | 1.36 | 7/8″ | 4.27 | - | - |
| M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1″ | 6.13 | - | - |
| M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8″ | 7.69 | - | - |
| M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4″ | 9.90 | - | - |
| M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | - | - | - | - |
| M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2″ | 17.24 | - | - |
| M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | - | - | 7.17 | 5.61 | - | - | - | - |
| M-42 | 17.50 | 20.10 | 18.30 | - | - | - | - | 11.10 | 8.00 | - | - | - | - |
| M-45 | 21.20 | 22.20 | 22.00 | - | - | - | - | 11.70 | 8.53 | - | - | - | - |
| M-48 | 28.40 | 26.00 | 29.40 | - | - | - | - | 12.30 | 9.00 | 2″ | 27.78 | - | - |
| M-52 | 31.90 | - | 33.00 | - | - | - | - | 18.20 | - | - | - | - | - |
| M-56 | 47.90 | - | - | - | - | - | - | 19.30 | - | - | - | - | - |
| M-60 | 51.60 | - | - | - | - | - | - | 20.30 | - | - | - | - | - |
| M-64 | 55.40 | - | - | - | - | - | - | 21.80 | - | - | - | - | - |
| M-68 | 57.40 | - | - | - | - | - | - | - | - | - | - | - | - |
| M-72 | 63.40 | - | - | - | - | - | - | 24.00 | - | - | - | - | - |
Washer Size Chart
| NOM SIZE MM | Inner Dia (d) Basic Tol (+) | Outer Dia (d1) Max | WIDTH (b) Basic Tol (+ or -) | THICKNESS (S) Basic Tol (+ or -) | Weight per 1000 in Kgs | |||
|---|---|---|---|---|---|---|---|---|
| 3 | 3.1 | 0.3 | 6.2 | 1.3 | 0.1 | 0.8 | 0.1 | 0.11 |
| 4 | 4.1 | 0.3 | 7.6 | 1.5 | 0.1 | 0.9 | 0.1 | 0.18 |
| 5 | 5.1 | 0.3 | 9.2 | 1.8 | 0.1 | 1.2 | 0.1 | 0.36 |
| 6 | 6.1 | 0.4 | 11.8 | 2.5 | 0.15 | 1.6 | 0.1 | 0.83 |
| 8 | 8.1 | 0.4 | 14.8 | 3 | 0.15 | 2 | 0.1 | 1.60 |
| 10 | 10.2 | 0.5 | 18.1 | 3.5 | 0.2 | 2.2 | 0.15 | 2.53 |
| 12 | 12.2 | 0.5 | 21.1 | 4 | 0.2 | 2.5 | 0.15 | 3.82 |
| 14 | 14.2 | 0.5 | 24.1 | 4.5 | 0.2 | 3 | 0.15 | 6.01 |
| 16 | 16.2 | 0.8 | 27.4 | 5 | 0.2 | 3.5 | 0.2 | 8.91 |
| 18 | 18.2 | 0.8 | 29.4 | 5 | 0.2 | 3.5 | 0.2 | 9.73 |
| 20 | 20.2 | 1 | 33.6 | 6 | 0.2 | 4 | 0.2 | 15.20 |
| 22 | 22.5 | 1 | 35.9 | 6 | 0.2 | 4 | 0.2 | 16.50 |
| 24 | 24.5 | 1 | 40 | 7 | 0.25 | 5 | 0.2 | 26.20 |
| 27 | 27.5 | 1 | 43 | 7 | 0.25 | 5 | 0.2 | 28.70 |
| 30 | 30.5 | 1.2 | 48.2 | 8 | 0.25 | 6 | 0.2 | 44.30 |
| 33 | 33.5 | 1.2 | 55.2 | 10 | 0.25 | 6 | 0.2 | 63.00 |
| 36 | 36.5 | 1.2 | 58.2 | 10 | 0.25 | 6 | 0.2 | 67.30 |
| 39 | 39.5 | 1.2 | 61.2 | 10 | 0.25 | 6 | 0.2 | 71.70 |
| 42 | 42.5 | 1.2 | 68.2 | 12 | 0.25 | 7 | 0.25 | 111.00 |
| 45 | 45.5 | 1.2 | 71.2 | 12 | 0.25 | 7 | 0.25 | 117.00 |
| 48 | 49 | 1.5 | 75 | 12 | 0.25 | 7 | 0.25 | 123.00 |
| 52 | 53 | 1.5 | 83 | 14 | 0.25 | 8 | 0.25 | 182.00 |
Spring Washers Flat And Square Section as Per Bss 1802-1951
| SIZE IN INCHES |
SIZE IN MM |
FLAT SECTION WIDTH X THICKNESS |
SQUARE SECTION WIDTH and THICKNESS |
|---|---|---|---|
| 1/8” | 3.18 | 1.2 X 0.8 | – |
| 5/32” | 3.97 | 1.6 X 0.8 | – |
| 3/16” | 4.76 | 2.3 X 1.2 | 1.6 |
| ¼” | 6.35 | 2.3 X 1.6 | 1.8 |
| 5/16” | 7.94 | 3.3 X 1.6 | 2 |
| 3/8” | 9.53 | 3.7 X 1.6 | 2.3 |
| 7/16” | 11.11 | 4.1 X 1.6 | 2.6 |
| ½” | 12.70 | 4.1 X 2.3 | 3 |
| 9/16” | 14.29 | 4.9 X 2.3 | 3.3 |
| 5/8” | 15.88 | 4.9 X 3.3 | 3.7 |
| ¾” | 19.05 | 5.9 X 3.3 | 4.5 |
| 7/8” | 22.23 | 6.4 X 3.3 | 5.4 |
| 1” | 25.40 | 7.1 X 4.7 | 5.9 |
Application & Uses of Washers:
Piping Projects Middle East is your Most Reliable Quality Steel Product Manufacturer and supplier. Piping Projects Middle East has a long history of experience and has built a strong reputation for manufacturing high-quality steel products for various piping projects in the UAE.
